PC 2002-22 - Laserfiche WebLink

Resolution No. PC-2002-22 Page 7 Section 9.21.050. Review of Recyclable Materials Management Plan. a. Approval: Notwithstanding any other provision of this Chapter, no building or demolition permit shall be issued for any Covered Project unless and until the Compliance Official has approved the Plan. Approval shall not be required, however, where an emergency demolition is necessary to protect public health or safety as determined by the Chief Building Official. The Compliance Official shall only approve a Plan if he or she first determines that all of the following conditions have been met: (1) the Plan provides all of the information set forth in Section 9.21.030; (2) the Plan indicates that at least fifty percent (50%) of all C&D debris generated by the Project shall be reused or recycled; and (3) the Applicant has submitted an appropriate Performance Security in compliance with Section 9.21.040 (if required). If the Compliance Official determines that these conditions have been met, he or she shall mark the Plan "Approved", return a copy of the Plan to the Applicant, and notify the Building Inspection Division that the Plan has been approved. b. Nonapproval: If the Compliance Official determines that the Plan is incomplete or fails to indicate that at least fifty percent (50%) of all C&D debris generated by the Project will be reused or recycled, he or she shall either: (1) Return the Plan to the Applicant marked "Denied", including a statement of reasons, and so notify the Building Inspection Division, which shall then immediately stop processing the building or demolition permit application; or (2) Return the Plan to the Applicant mazked "Further Explanation Required", and state the information required. c. Time for Action: The Compliance Official shall approve or deny a complete Plan within ten (10) business days of submission. Section 9.21.060. Compliance with Recyclable Material Management Plan. a. Documentation: Except as provided below, prior to final inspection of any Covered Project, the Applicant shall submit to the Compliance Official documentation that the Applicant has met the Diversion Requirement for the Project. The Diversion Requirement shall be that the Applicant has diverted at least fifty percent (50%) of the total C&D debris generated by the Project by reuse or recycling, unless the Applicant has been granted an Exemption pursuant to Section 9.21.070, in which case the Diversion Requirement shall be the maximum