2341 - Laserfiche WebLink

27. That the developer acknowledges that the City of Pleasanton does not guarantee the availability of sufficient sewer capacity to serve this development by the approval of this case, and that the developer agrees and acknowledges that building permit approval may be withheld if sewer capacity is found by the City not to be available. 28. That all buildings and /or structures must comply with all codes and ordinances in effect at the time required permits are issued by the Building Division. 29. That the location of any pad mounted transformers shall be subject to approval by the Planning Division prior to issuance of a building permit. Generally speaking such transformers shall not be located between any street and the front of a building. 30. That the developer submit a site development plan in accordance with the Survey Ordinance (Article 3, Chapter 3, Title II) and that these plans be approved by the City Engineer prior to the issuance of a building permit. 31. That the site development plan include all required information to design and construct site, grading, paving and drainage. Specific items to be indicated on the site development plan necessary to construct storm, sewer and water systems are: a. Type of pipes to be used (storm, sewer, water); b. Length of pipes in linear feet (storm, sewer, water); c. Slopes of pipes (storm and sewer); d. Invert elevations at each inlet or junction structure (storm and sewer); e. Horizontal control necessary to set relationships between buildings, parking, curb and gutter.(storm, sewer and water); f. Show top of pipe and bottom of pipe elevations where any pipes cross under or over one another. g. Differentiate between public and private systems. Landscape areas, parking stalls, driveway aisles, buildings, curbs and gutters shall have horizontal control dimensioning indicated on site development plan.