Laserfiche WebLink
devices. <br /> <br />33. At no time shall campers, trailers, motor homes, or any other vehicle be used as. <br /> living or sleeping quarters on the construction site. All such vehicles shall be <br /> remow~d from the site at the end of each workday. <br /> <br />34. The developer shall pay any and all fees to which the propert3, may be subject <br /> prior to issuance of building permits. The type and amount of the fees shall be <br /> those in effect at the time the building permit(s) is issued. <br /> <br />35. All dwelling units in the development shall be constructed to meet Title 24 state <br /> energy requirements. <br /> <br />36. All building and/or structural plans must comply with all codes and ordinances in <br /> effect before the Building Department will issue permits. <br /> <br />37. The applicant shall submit a building survey and/or a record of survey and a site <br /> development plan in accordm~ce with the provisions of Chapter 18.68 of the <br /> Municipal Code of thc City of Pleasanton. These plans shall be approved by the <br /> Director of Building Inspection prior to the issuance of a building permit. The site <br /> development plan shall include all required information to design and construct . <br /> site, grading, paving, drainage and utilities. Specific items to be indicated on the <br /> site developtnent plan necessary to construct the improvements are to be in <br /> accordance with the City of Pleasanton Private Development Design Guidelines <br /> adopted April 15, ! 986. <br /> <br />3 8. Prior to issuance of a building permit, the applicant shall pay the applicable Zone 7 <br /> and City connection fees and water meter cost for any water meters, including <br /> irrigation meters. Additionally, the developer shall pay any applicable DSRSD <br /> sewer permit fee. <br /> <br />39. All retaining walls higher than four feet from the top of the wall to the bottom of <br /> the footway shall be constructed of reinforced concrete or shall be an approved <br /> crib wall type. <br /> <br />40. The applicant shall submit plot plans for each of the residential lots showing <br /> building setbacks and a topographic plan showing grading and drainage. Pad <br /> elevations, finish floor elevations, retaining walls, easements, and maximum <br /> height of the highest structure are to be indicated on the plan. Plans for Custom <br /> and Estate lots are to be signed by a registered civil engineer. All residential plot <br /> <br /> PUD-96-14 <br /> <br /> <br />