My WebLink
|
Help
|
About
|
Sign Out
09
City of Pleasanton
>
CITY CLERK
>
AGENDA PACKETS
>
2009
>
021709
>
09
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/12/2009 4:40:27 PM
Creation date
2/11/2009 1:15:38 PM
Metadata
Fields
Template:
CITY CLERK
CITY CLERK - TYPE
STAFF REPORTS
DOCUMENT DATE
2/17/2009
DESTRUCT DATE
15 Y
DOCUMENT NO
09
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
37
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
47. The applicant shall implement the following measures with the construction of the <br />structures covered by this approval so that roof-mounted photovoltaic systems can <br />be installed in the future: <br />a. Install electrical conduit and pull string from the roof/attic areas to the <br />building's main electrical panels; <br />b. Engineer the roof trusses to handle an additional load as determined by <br />a structural engineer to accommodate the additional weight of a <br />prototypical photovoltaic system beyond that anticipated for roofing; <br />and <br />c. Provide an area near the electrical panel for the "inverter" required to <br />convert the direct current output from the photovoltaic panels to <br />alternating current. <br />These measures shall be indicated on the building permit plan sets. <br />Building Conditions <br />48. All future dwelling units in the development shall be constructed to meet Title 24 <br />state energy conservation requirements. <br />49. All building and/or structural plans must comply with all codes and ordinances in <br />effect before the Building and Safety Division will issue permits. <br />50. The project developer shall submit plot plans for each of the residential lots <br />showing building setbacks and a topographic plan showing grading and drainage. <br />Pad elevations, finish floor elevations, retaining walls, easements, and maximum <br />height of the highest structure are to be indicated on the plan. All residential plot <br />plans shall show compliance with 2907(d) and 70012(d) of the Uniform Building <br />Code. <br />51. The project developer shall submit a final map, a building survey, or record of <br />survey and a site development plan in accordance with the provisions of <br />Chapter 18.68 of the Municipal Code of the City of Pleasanton. These plans shall <br />be approved by the Chief Building Official prior to the issuance of a building <br />permit. The site development plan shall include all required information to design <br />and construct site, grading, paving, drainage, and utilities. Specific items to be <br />indicated on the site development plan necessary to construct the improvements <br />are to be in accordance with the City of Pleasanton Private Development Design <br />Guidelines adopted April 15, 1986. <br />10 <br />
The URL can be used to link to this page
Your browser does not support the video tag.