15 ATTACHMENT 5 - Laserfiche WebLink

e) Install filter materials (such as sandbags, filter fabric, etc.) at the storm drain inlet nearest the downstream side of the project site in order to retain any debris or dirt flowing in the storm drain system. Maintain and/or replace filter materials to ensure effectiveness and to prevent street flooding. f) Create a contained and covered area on the site for the storage of bags, cement, paints, oils, fertilizers, pesticides, or other materials used on the site that have the potential of being discharged into the storm drain system through being windblown or in the event of a material spill. g) Never clean machinery, equipment, tools, brushes, or rinse containers into a street, gutter, or storm drain. h) Ensure that concrete/gunite supply trucks or concrete/plaster operations do not discharge wash water into street, gutters, or storm drains. Stormwater Oueration Requirements 110. Unless otherwise determined by the City Engineer or Chief Building Official, the developer and/or future property owners shall enter into a recorded Stormwater Treatment Measures Inspection and Maintenance Agreement for ongoing maintenance and reporting of required stormwater measures. These measures may include, but are not limited to: a) A mechanism shall be created, such as a property owners' association, to be responsible for maintaining all private streets, private utilities, and other privately owned common areas and facilities on the site including stormwater treatment measures. These maintenance responsibilities shall include implementing the maintenance plan, which is attached to the Stormwater Treatment Measures Inspection and Maintenance Agreement. This document shall be reviewed by the City Attorney's Office and recorded with the final map. b) On-site storm drain inlets clearly marked and maintained with the words "No Dumping -Drains to Bay." {end}