ORD 1958 - Laserfiche WebLink

Ordinance No. 1958 Page 5 of 17 a. Lighting shall be directed away from adjacent properties and shall incorporate cut-off shield type fixtures to prevent glare onto adjacent properties or roadways. b. The height of the light poles shall not exceed 14 feet. c. Lighting levels shall be no greater than 0.2 foot-candle at the easterly and southerly property lines. d. The parking area lights shall be programmed to turn off at 9:00 p.m. or 15 minutes after the closing of the last business in the building, whichever is greater. 19. The project's Sunol Boulevard driveways shall be limited to right-turn only ingress and egress. The applicant shall install adequate signing/striping to indicate the right-turn only ingress/egress restriction for the driveways. The applicant shall also modify the Sunol Boulevard lane striping, as determined by the City Traffic Engineer, to accommodate the project's new Sunol Boulevard driveways. A signing/striping plan shall be submitted in conjunction with the building permit plan check plans. Said plan shall be subject to the review and approval by the City Traffic Engineer prior to issuance of a building permit for the project. 20. Unless otherwise approved by the City Traffic Engineer, the applicant shall install standard ramping driveways at the new driveways on Sunol Boulevard rather than street openings as shown on the plans. The final design of the driveways shall be shown on the plans submitted for issuance of building permits and shall be subject to the review and approval by the City Engineer and Planning Director prior to issuance of building permits for the project. 21. The applicant shall submit a simple transportation systems management program to provide incentives for employees or agents to use public transit, carpool, bike, or walk to work to reduce traffic and parking. Such a program could include incentives such as: free or reduced cost Wheels/BART passes, cash incentives program, installing lockers, etc. Said program shall be subject to the review and approval by the Planning Director prior to occupancy. 22. All trash and refuse shall be contained completely within the approved trash enclosure. The materials and color of the enclosure shall match the building and the gates shall be corrugated metal or solid wood. The design of the enclosure shall be shown on the plans submitted for issuance of building permits and shall be subject to the approval of the Planning Director and Fire Chief. Trash containers shall be stored within the enclosure at all times, except when being unloaded. 23. The applicant shall install and maintain an ashtray near the smoking bench on the subject property. 24. The location of any pad-mounted transformers shall be subject to approval by the Planning Director prior to issuance of permits by the Building and Safety Division. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. The project developer shall attempt to locate transformers at the rear of the site. 5