13 ATTACHMENTS - Laserfiche WebLink

pavement adjoining the project site on a daily basis. Scrape caked-on mud and dirt from these areas before sweeping. e. Install filter materials (such as sandbags, filter fabric, etc.) at the storm drain inlet nearest the downstream side of the project site in order to retain any debris or dirt flowing in the storm drain system. Maintain and/or replace filter materials to ensure effectiveness and to prevent street flooding. f. Create a contained and covered area on the site for the storage of bags, cement, paints, oils, fertilizers, pesticides, or other materials used on the site that have the potential of being discharged into the storm drain system through being windblown or in the event of a material spill. g. Never clean machinery, equipment, tools, brushes, or rinse containers into a street, gutter, or storm drain. h. Ensure that concrete/gunite supply trucks or concrete/plaster operations do not discharge wash water into street, gutters, or storm drains. Stormwater Operation Requirements 96. The applicant shall enter into a recorded Stormwater Treatment Measures Inspection and Maintenance Agreement for ongoing maintenance and reporting of required stormwater measures. These measures may include, but are not limited to: a. The property owner(s) shall be responsible for maintaining all stormwater treatment measures on the site. These maintenance responsibilities shall include implementing the maintenance plan, which is attached to the Stormwater Treatment Measures Inspection and Maintenance Agreement. This document shall be reviewed by the City Attorney's Office and recorded prior to occupancy. b. On-site storm drain inlets clearly marked and maintained with the words "No Dumping -Drains to Bay" using City-approved methods and materials. c. Proper maintenance of landscaping, with minimal pesticide and fertilizer use. d. Ensure wastewater from vehicle and equipment washing operations is not discharged to the storm drain system. 18