Laserfiche WebLink
<br />I EXHffiIT B <br /> <br />CONTRACT <br /> <br />RESURFACING OF VARIOUS CITY STREETS <br /> <br />PROJECT NO. OSS003 <br /> <br />THIS CONTRACT is made and entered into this _ day of , 20_ by and <br />between ("Contractor"), whose address is <br />and telephone number is and the CITY OF PLEASANTON, a municipal <br />corporation ("City"). <br /> <br />WITNESSETH: <br /> <br />WHEREAS, the City has awarded to the Contractor a contract for Resurfacing of Various <br />City Streets, Project No.055003. <br /> <br />NOW, THEREFORE, in consideration of the mutual promises set forth herein, the parties <br />agree as follows: <br /> <br />I. Work to be Performed. <br /> <br />The work will consist of resurfacing approximately 1,250,000 square feet of various City <br />streets with either Stress Absorbing Membrance Interlayer (SAMI) overlay construction <br />method or with conventional overlay construction method. <br /> <br />The work generally consists of either placing the asphalt concrete over the existing <br />pavement (conventional AC overlay) or placing the rubberized chip seal over existing <br />pavement and placement of conventional asphalt concrete (SAM!). <br /> <br />The work shall also include base repair, adjusting appurtenances to grade, installation of <br />pavement markers, legends and striping, and traffic loops as required in the contract <br />documents. The Contractor shall furnish all labor, materials, equipment, incidentals, <br />transportation, traffic control and services necessary to complete the work in accordance <br />with these Project Plans and Special Provisions. <br /> <br />Said work is more particularly shown in the following documents which are on file with <br />the Department of Public Works of the City and are incorporated herein by this reference: <br /> <br />A. Plans and Specifications entitled the Resurfacing of Various City Streets, <br />Project No. 055003 and addenda thereto, if any. <br /> <br />B. Contract Change Orders approved by the City Engineer, done in <br />accordance with the Standard Specifications. <br />