Laserfiche WebLink
<br />Resolution No. PC-95-52 <br />Page 5 <br /> <br />EXHIBIT "B" <br />Conditions of Approval <br />Case PUD-92-01-1M <br /> <br />1. All conditions and requirements of the previously approved <br />development plan and design guidelines, Case PUD-92-1, for <br />this development shall remain in full force and effect <br />except for the following changes: <br /> <br />a. The maximum floor area ratio on Lots 6, 9, 11, and 13 <br />shall be 30%. The floor area ratio on Lots 5, 7, 8, <br />10, 12, 14, and 15 would remain at 25%. If Lot 11 is <br />developed as a custom lot or is not developed with one <br />of the models approved under Case Z-95-77, the FAR <br />shall be 25%. <br /> <br />b. The maximum floor area ratio on Lots 16, 18, 19, 20, <br />24, 26, 30, 34, and 38 shall be 35%. On Lots 17, 21 to <br />23, 25, 27 to 29, 31 to 33, and 35 to 40, the floor <br />area ratio would remain at 30%. <br /> <br />c. A 20' combined sideyard dimension shall be allowed on <br />Lot 5 only for the Plan One (one-story) house. The 30' <br />sideyard setback would be required for a two-story <br />house. The Plan Two and Three two-story houses shall <br />still be covered by the R-1-20,000 sideyard require- <br />ments. <br /> <br />2. Approval of the development plan modification shall be <br />contingent upon approval of the design review application, <br />Case Z-95-77, for the primary residence designs of the <br />walnut Glen Estates subdivision. If the design review <br />application fails, the PUD modification shall have no legal <br />force or effect. <br /> <br />{end} <br />