PC-2004-58 - Laserfiche WebLink

d. The "Pleasanton U.S. Gas" logo on the convenience marketlcarwash building and on the service station canopy shall be composed of routed-out blue and red coloring on an opaque background. This constitutes the entire project sigo program. Construction details for the monument and building sigos shall be submitted to the Planning Director for review and approval prior to installation. Any changes to the approved sign program, including color, name, etc., shall be submitted for the review and approval of the Planning Commission. 13. The project developer shall submit a waste management plan to the Building Department prior to issuance of building or demolition permits. The plan shall include the estimated composition and quantities of waste to be generated and how the project developer intends to recycle at least 50-percent of the total job site construction and demolition waste measured by weight or volume. Proof of compliance shall be provided to the Chief Building Official prior to the issuance of a final building permit. During demolition and construction, the project developer shall mark all trash disposal bins "trash materials only" and all recycling bins "recycling materials only". The project developer shall contact Pleasanton Garbage Service for the disposal of all waste from the site. Building and Site Design Requirements: 14. The entry wall to be located at the north/south interblock driveway from Utah Street shall be three feet in height and faced with the cobblestone rock material matching the material used on the proposed buildings. The wall design shall be submitted to the Planning Director for review and approval with the building permit plan set. 15. The project developer shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the main structure. Screening details shall be shown on the plans submitted for issuance of building permits, the adequacy of which shall be determined by the Planning Director. All required screening shall be provided prior to occupancy. 16. The project developer shall post address numerals on the buildings so as to be plainly visible from all adjoining streets or driveways during both daylight and night time hours. 17. All mechanical equipment shall be located in the roof attic area of the convenience market or in the equipment well over the carwash. If located in the equipment well, the equipment shall not project above the horizontal plane established by the surrounding roof parapets. 18. All trash and refuse shall be contained completely within enclosures architecturally compatible with the main structure. The materials and color of the enclosure walls shall match the building walls and the gates shall be corrugated metal or solid wood. The location and desigo of the enclosures shall be shown on the plans submitted for issuance of building permits, shall be consistent with Condition #48, and shall be subject to the approval of the Planning Director and Fire Chief. Trash containers shall be stored within the enclosure at all times, except when being unloaded. 3 I