PC-96-80 - Laserfiche WebLink

f . . ~ Resolution No. PC-96-80 Page 15 d.) Install filter materials (such as sandbags, filter fabric, etc.) at the storm drain inlet nearest the downstream side of the project site in order to retain any debris or dirt flowing into the City storm drain system. Filter materials shall be maintained and/or replaced as necessary to ensure effectiveness and to prevent street flooding. Dispose of filter particles in the trash. e.) Create a contained and covered area on the site for the storage of bags, cement, paints, flammable, oils, fertilizers, pesticides, or any other materials used on the project site that have the potential for being discharged to the storm drain system through being windblown or in the event of a material spill. f.) Never clean machinery, tools, brushes, etc., or rinse containers into a street, gutter, or storm drain. g.) Ensure that concrete/gunite supply trucks or concrete/plasterers operations do not discharge wash water into street gutters or drains. h.) Construction access routes shall be limited to those approved by the City Engineer or Building Inspector and shall be shown on the approved grading plan. 85. The applicant shall label all on-site storm drain inlets with the wording, "No Dumping -- Drains to Bay" using City-approved methods and materials. On-site storm drain facilities shall be cleaned a minimum of twice a year as follows: immediately prior to October 15 and once in January. Additional cleaning may be required if found necessary by the City Engineer/Director of Building Inspection. 86. The applicant shall revise the site plan such that the tot lot is located closer to Building 8; the parking in that location is removed to accommodate the tot lot, retaining as much parking as possible; and the soundwall shall be installed around the tot lot. {end}