|
0617901 Lights, Perimeter Pump House,
<br />TecNiq T10-LC00-1 15" LED 2lts
<br />
<br />PUMP HOUSE PERIMETER LIGHTS
<br />There will be two (2) TecNiq, Model T10-LC00-1, 15.00" white 12 volt DC LED weatherproof strip
<br />lights provided under the pump panel running boards, one (1) each side.
<br />The lights will be controlled by the same means as the body perimeter lights.
<br />0626579 Lights, Perimeter Body, TecNiq T10-
<br />LC00-1 15" LED 2lts, Rear Step
<br />
<br />BODY PERIMETER SCENE LIGHTS
<br />There will be two (2) TecNiq, Model T10-LC00-1, 15.00" 12 volt DC LED strip lights provided at
<br />the rear step area of the body, one (1) each side shining to the rear.
<br />The perimeter scene lights will be activated when a switch within reach of the driver is activated
<br />and the parking brake is applied and the headlight switch is activated.
<br />0617802 Lights, Perimeter, TecNiq T10-LC00-
<br />1 15" LED
<br />ADDITIONAL PERIMETER LIGHTS
<br />There will be six (6) TecNiq, Model T10-LC00-1, 1.25" high x 15.00" long white LED light(s)
<br />provided under under the front bumper each side and under LS1, RS1, LS3, RS3.
<br />These additional lights will be controlled with the other body perimeter lights.
<br />0896454 Enhanced Software for Perimeter Lts
<br />
<br />ENHANCED SOFTWARE FOR PERIMETER LIGHTS
<br />All perimeter lights will be deactivated when the parking brake is released unless alternate control
<br />is selected.
<br />The cab and crew cab perimeter lights will remain on for ten (10) seconds for improved visibility
<br />after the doors closed.
<br />0556360 Lights, Step, P25 LED 4lts, Pump Pnl
<br />Sw
<br />STEP LIGHTS
<br />Four (4) white LED step lights will be provided. One (1) step light will be provided on each side,
<br />on the front compartment face and two (2) step lights at the rear to illuminate the tailboard.
<br />In order to ensure exceptional illumination, each light will provide a minimum of 25 foot-candles
<br />(fc) covering an entire 15.00" x 15.00" square placed 10.00" below the light and a minimum of 1.5
<br /> fc covering an entire 30.00" x 30.00" square at the same 10.00" distance below the light.
<br />These step lights will be actuated with the pump panel light switch.
<br />All other steps on the apparatus will be illuminated per the current edition of NFPA 1901.
<br />0892654 Light, Step, Additional, P25 LED
<br />
<br />ADDITIONAL STEP LIGHT
<br />There will be Model P25 white LED step lights with chrome housing to provide additional lighting.
<br />The step lights will be installed under the upper edge of the hose the bed side sheets, three (3)
<br />per side, evenly divided along the length of the side sheet. Enclose the side sheet flange and
<br />mount lights to the underside. All switched with the step lights. Match 29597. The quantity of
<br />additional step lights will be six (6) lights.
<br />In order to ensure exceptional illumination, each light will provide a minimum of 25 foot-candles
<br />(fc) covering an entire 15" x 15" square placed ten (10) inches below the light and a minimum of
<br />1.5 fc covering an entire 30" x 30" square at the same ten (10) inch distance below the light.
<br />The additional step lights will be activated by the same means as the standard step lights.
<br />0773361 SP Light, Visor, Wln, 12V P*H2* Pioneer
<br />LED, Dripless
<br />12 VOLT LIGHTING
<br />There will be one (1) Whelen® Model P*H2*, 17,750 lumens 12 volt DC LED light(s) with a
<br />combination of flood and spot optics provided on the front visor on a dripless bracket, centered.
<br />The painted parts of this light assembly to be black.
<br />The light(s) will be controlled by a switch at the driver's side switch panel and by a switch at the
<br />passenger's side switch panel.
<br />These light(s) may be load managed when the parking brake is applied.
<br />0774308 Lights, Wln, P*H2* Pioneer, 12 VDC,
<br />2nd
<br />12 VOLT DC SCENE LIGHTS
<br />There will be one (1) Whelen® Model P*H2*, 17,750 lumens 12 volt DC powered lights with white
<br />LEDs and a combination of flood and spot optics installed on the apparatus located, RS rear of
<br />cab, please ensure the lighthead does not extend past the outer edge of the cab wall. Also keep
<br />the black coiled wire from rubbing on the rear wall of the cab.
<br />The light(s) to be installed on push up side mount, outside pole length to be 12.00" long with
<br />handle holder and sensor connecting the pole to the Do Not Move Truck Indicator circuit.
<br />The painted parts of this light assembly to be black.
<br />The lights will be activated by a switch at the left side pump panel and by a switch at the right side
<br />pump panel.
<br />The light(s) may be load managed when the parking brake is applied.
<br />0774309 Lights, Wln, P*H2* Pioneer, 12 VDC,
<br />1st
<br />12 VOLT DC SCENE LIGHTS
<br />There will be one (1) Whelen® Model P*H2*, 17,750 lumens 12 volt DC powered lights with white
<br />LEDs and a combination of flood and spot optics installed on the apparatus located, LS rear of
<br />cab, please ensure the lighthead does not extend past the outer edge of the cab wall. Also keep
<br />the black coiled wire from rubbing on the rear wall of the cab..
<br />The light(s) to be installed on push up side mount, outside pole length to be 12.00" long with
<br />handle holder and sensor connecting the pole to the Do Not Move Truck Indicator circuit.
<br />The painted parts of this light assembly to be black.
<br />The lights will be activated by a switch at the left side pump panel and by a switch at the right side
<br />pump panel.
<br />The light(s) may be load managed when the parking brake is applied.
<br />33717Bid #:
|