04 - Laserfiche WebLink

0614915 Work Surface, 1/4" Alum, Full Engine Tunnel, Flat, Lower Rear, SFR/Enf WORK SURFACE ON ENGINE TUNNEL There will be a work surface provided on the engine tunnel. The work surface will cover the entire engine tunnel and follow the width of the engine tunnel. It will be constructed of 0.25" aluminum. The beginning of the work surface will be spaced 1.00" off the top surface of the engine tunnel. The work surface will be flat from the front of the engine tunnel to the beginning of the lower flat section of the engine tunnel. The work surface will flange down 90 degrees at the beginning of the lower flat section and then extend to the rear of the engine tunnel. The rear of the work surface will be spaced 1.00" off the engine tunnel. The work surface will be open on the sides to allow for equipment to be mounted underneath it. The mounting surface will be painted to match the cab interior. 0750824 Cab Interior, Vinyl Headliner, Saber FR/Enforcer, CARE CAB INTERIOR The cab interior will be constructed of primarily metal (painted aluminum) to withstand the severe duty cycles of the fire service. The engine tunnel will be padded and covered, on the top and sides, with dark silver gray 36 ounce leather grain vinyl resistant to oil, grease, and mildew. For durability and ease of maintenance, the cab interior side walls will be painted aluminum. The rear wall will be painted aluminum. The headliner will be installed in both forward and rear cab sections. Headliner material will be vinyl. A sound barrier will be part of its composition. Material will be installed on an aluminum sheet and securely fastened to interior cab ceiling. The forward portion of the cab headliner will permit easy access for service of electrical wiring or other maintenance needs. All wiring will be placed in metal raceways. CAB INTERIOR UPHOLSTERY The cab interior upholstery will be 36 oz dark silver gray vinyl. 0753903 Cab Interior, Paint Color, Saber FR/Enforcer CAB INTERIOR PAINT The cab interior metal surfaces, excluding the rear heater panels, will be painted fire smoke gray, vinyl texture paint. The rear heater panels will be painted black, vinyl textured paint. 0052100 Floor, Rubber Padded, Cab & Crew Cab, Saber/Enforcer CAB FLOOR The cab and crew cab floor areas will be covered with Polydamp™ acoustical floor mat consisting of a black pyramid rubber facing and closed cell foam decoupler. The top surface of the material has a series of raised pyramid shapes evenly spaced, which offer a superior grip surface. Additionally, the material has a 0.25" thick closed cell foam (no water absorption) which offers a sound dampening material for reducing sound levels. 16717Bid #: