PLE-2023-01-supp-29 - Laserfiche WebLink

20.26.010 805 (Pleasanton Supp. No. 29, 1-23) 20.26.370 Section 5.106.13 added—All-electric buildings. 20.26.380 Section 5.408 amended— Construction waste reduction, disposal and recycling. * Prior ordinance history: Ord. 2083. 20.26.010 California Green Building Standards (CALGreen) Code adopted. There is adopted by reference that certain code known as the California Green Building Standards (CALGreen) Code at Title 24 California Code of Regu- lations Part 11 (2022 Edition), as more particularly de- scribed in this section, except such provisions that are amended, modified or deleted in this chapter, and the same is adopted and incorporated as fully as if set out in this chapter. A copy of said code is available for use by the public at the City of Pleasanton’s Building Division. (Ord. 2241 § 2, 2022; Ord. 2197 § 2, 2019; Ord. 2153 § 2, 2016) 20.26.020 Section 101.3 Scope amended. Section 101.3 Scope is amended to read as fol- lows: 101.3 Scope. The provisions of this code shall ap- ply to the planning, design, operation, construc- tion, use and occupancy of every newly con- structed building or structure, unless otherwise in- dicated in this code, throughout the State of Cali- fornia. Any “Newly constructed building or struc- ture” subject to CALGreen and this chapter does not include renovations, repairs or additions, to historic buildings, defined as any building listed or eligible for listing on a national, state or local reg- ister or listing of historic resources. It is not the intent that this code substitute or be identified as meeting the certification require- ments of any green building program. (Ord. 2241 § 2, 2022; Ord. 2226 § 3, 2021; Ord. 2197 § 2, 2019; Ord. 2153 § 2, 2016) 20.26.030 Section 107.1 added—Local enforcing agency. Section 107.1 is added to read as follows: 107.1 Local Enforcing Agency. The Building Di- vision of the City of Pleasanton shall enforce all the provisions of this law, this code and the other rules and regulations promulgated by the Building Standards Commission, the Department of Hous- ing and Community Development or the Division of the State Architect, and Chapter 20.04, the Pleasanton Building Administrative Code. (Ord. 2241 § 2, 2022; Ord. 2197 § 2, 2019; Ord. 2153 § 2, 2016) 20.26.040 Chapter 2 Definitions—Amended. Chapter 2 Definitions are amended to read as fol- lows: AUTOMATIC LOAD MANAGEMENT SYS- TEM (ALMS). A control system designed to manage load across one or more electric vehicle supply equipment (EVSE), circuits, panels and to share electrical capacity and/or automatically manage power at each connection point. ALMS systems shall be designed to deliver no less than 3.3 kVa (208/240 volt, 16-ampere) to each EV Capable, EV Ready or EVCS space served by the ALMS, and meet the requirements of California Electrical Code Article 625. The connected am- perage to the building site for the EV charging in- frastructure shall not be lower than the required connected amperage per California Green Build- ing Standards Code, Title 24 Part 11. ELECTRIC VEHICLE CHARGING STA- TION (EVCS). A parking space that includes in- stallation of electric vehicle supply equipment (EVSE) at an EV Ready space. An EVCS space may be used to satisfy EV Ready space require- ments. EVSE shall be installed in accordance with the California Electrical Code, Article 625. ELECTRIC VEHICLE SUPPLY EQUIP- MENT (EVSE). The electric vehicle charging connectors, attachment plugs, and all other fit- tings, devices, power outlets, or apparatus in- stalled specifically for the purpose of transferring energy between the premises wiring and the elec- tric vehicle. LOW POWER LEVEL 2 EV READY. A park- ing space that is served by a complete electric cir- cuit with the following requirements: i. A minimum of 4.1 kVA (208/240 Volt, 20- ampere) capacity wiring. ii. A receptacle labeled “Electric Vehicle Out- let” or electric vehicle supply equipment lo- cated within three (3) feet of the parking