PC-2023-04 - Laserfiche WebLink

Objective Desjgn standards for Housing s;tes Single Family Trac t Developmen t Single Family Homes and Primary Structures of Multiple Single Family Development on the same parcel shall comply with the following massing standards: B 1.3 Elevations fronting Public Streets, Internal Streets , Paseos, Open Spaces, or the City of Pleasanton Trail System shall limit any continuous plane to 40% of the total fa<;ade length through the use ofrecesses or projections not less than three feet in depth from the adjacent wall. B1.4 Garages shall comply with the following standards : a. Garages shall not be oriented to face Paseos or the city public Trail System b . Garages facing Public Streets and Internal Streets shall be limited to 1. 30% of the total width of the home fa<;ade, for lots over 80 feet wide 11. 40% of the total width of the front home fa<;ade , for lots over 60 feet wide, n1. 50% of the total width of the front home fa<;ade , for lots over 45 feet wide . or 22 feet interior clear width , whichever is greater, 1v. For parcels under 10 ,000 s.f. three car garages shall use tandem parking for third s pace within the garage. Bl.5 Residential floor area above the ground floor shall comply with the following standards: a . Floor area of any floor above the ground floor shall be no greater than : City of Pleasanton 1. 30% of the ground floor for lots greater than 8,000 square.feet. ii . 40% of the ground floor for lots of greater than 6 ,500 square feet and up to 8 ,000 square feet. iii. 60% of the ground floor for lots over 4 ,500 square feet and up to 6 ,500 square feet. 1v. 80 % of the ground floor for lots up to 4,500 square feet. b. Floor area located under sloping roofs shall be counted in accordance with the ANSI Z765 standard: v . Residential floor area above the ground floor must have a minimum clearance of 5 feet above the finished floor v1. 50% of the floor area above the ground floor must have ceilings at least 7 feet above the finished floor. -45 -DRAFT: January 4, 2023