03 ATTACHMENT 4 - Laserfiche WebLink

Objective Design Standards for Housing Sites City of Pleasanton - 34 - DRAFT: December 14, 2022 Single Family Tract Development Single Family Homes and Primary Structures of Multiple Single Family Development on the same parcel shall comply with the following massing standards: B1.3 Elevations fronting Public Streets, Internal Streets, Paseos, Open Spaces, or the City of Pleasanton Trail System shall limit any continuous plane to 40% of the total façade length through the use of recesses or projections not less than three feet in depth from the adjacent wall. B1.4 Garages shall comply with the following standards a. Garages shall not be oriented to face Paseos or the city public Trail System b. Garages facing Public Streets and Internal Streets shall be limited to 30% of the total width of the home façade, or 22 feet interior clear width, whichever is greater. B1.5 Residential floor area above the ground floor shall be limited to 40% of the ground floor area. a. Floor area located under sloping roofs shall be counted in accordance with the ANSI Z765 standard: i. Residential floor area above the ground floor must have a minimum clearance of 5 feet above the finished floor ii. 50% of the floor area above the ground floor must have ceilings at least 7 feet above the finished floor. Page: 38 Author: Steve Subject: Note Date: 12/19/2022 7:38:11 PM what about 3-car garages? Author: Steve Subject: Note Date: 12/20/2022 8:35:24 AM This standard will prohibit most modern small lot single family designs. What about 3-story product? Author: TZB Subject: Note Date: 12/19/2022 4:00:28 PM MSR Note: several of the above standards are not objective. Attachment 4 - ODS Public Comments - 01-26-23 CC - Page 26