5_Exhibit B - Laserfiche WebLink

Objective Design Standards for Housing Sites City of Pleasanton - Appendix Page 1 - DRAFT: December 14, 2022January 4, 2023 APPENDIX A MULTIFAMILY BUILDING TYPES Introduction Property owners and developers of multifamily projects are encouraged to “mix and match” among the following Building Types in order to achieve the required minimum average density, and to provide the varied building character desired by the City. It is anticipated that more than one building type will be built on large parcels, depending on the location, street frontage, mix of uses, and desired parking ratios. It is left to the applicant where and how to combine the Building Types listed below. If a developer wishes to incorporate a Building Type not identified in the Matrix, the City Council may review and approve new Types so long as the overall proposal conforms with the adopted Standards and Guidelines. While some of the prototypes described in the following pages are typically built at density ranges whic h may exceed the densities allowed on the nine sitesdesignated Housing Element Sites, such prototypes wouldcan be mixed with lower density building types on the site to achieve an average site density consistent with the maximum densities allowed in Table 2.1. The following multifamily building types and their average densities are listed in this document for reference only: B1A1. Attached Rowhouse/Townhouses (14-25 du/ac) B2A2. Garden Style with Surface parking (20-25 du/ac) B3A3. Tuck Under Podium (25-40 du/ac) B4A4. Townhouses/Flats with Podium Parking (40-60 du/ac) B5A5. Residential Wrap Building with Parking Structure (40-70 du/ac) B6A6. Residential Buildings with Off-Site Parking District (50-80 du/ac) B7A7. Mixed-Use Buildings B8A8. Retail Buildings (Stand Alone) B9A9. Live/Work