4_Exhibits A-C - Laserfiche WebLink

City of Pleasanton—City of Pleasanton 2023-2031 (6th Cycle) Housing Element Update Draft Program EIR Executive Summary FirstCarbon Solutions ES-10 https://adecinnovations.sharepoint.com/sites/PublicationsSite/Shared Documents/Publications/Client (PN-JN)/2148/21480022/EIR/3 - Draft/21480022 Sec00-03 Executive Summary.docx Impacts Mitigation Measures Level of Significance After Mitigation Section 3.2—Air Quality Impact AIR-1: Development consistent with the Housing Element Update, rezonings, and General Plan and Specific Plan Amendments could conflict with or obstruct implementation of the applicable air quality plan. MM AIR-1a: Prior to the issuance of a grading or building permit, whichever is sooner, the project applicant for a potential site for rezoning shall submit an air quality construction plan detailing the proposed air quality construction measures related to the project such as construction phasing, construction equipment, and dust control measures, and such plan shall be approved by the Director of Community Development. Air quality construction measures shall include Basic Construction Mitigation Measures, as approved by the Bay Area Air Quality Management District (BAAQMD) in 2017, and, where construction-related emissions would exceed the applicable thresholds, Additional Construction Mitigation Measures, as recommended by the BAAQMD, shall be implemented to reduce emissions to acceptable levels. The air quality construction plan shall be included on all grading, utility, building, landscaping, and improvement plans during all phases of construction and for access roads, parking areas, and staging areas at construction sites. MM AIR-1b: For project sites where new sensitive receptors, such as residences, would be located within siting distances recommended by the Bay Area Air Quality Management District (BAAQMD) and California Air Resources Board (ARB), currently published in the ARB Air Quality and Land Use Handbook: A Community Health Perspective, or the latest available guidance as determined by the City of Pleasanton as the lead agency, to sources of Toxic Air Contaminants (TACs), the following measures shall be implemented for development on such sites to reduce exposure to TACs and improve indoor and outdoor air quality: Indoor Air Quality–In accordance with the recommendations of the BAAQMD, appropriate measures (refer to Section 5 of the BAAQMD CEQA Guidelines) shall be incorporated into building design in order to reduce the potential health risk due to exposure of sensitive receptors to TACs, including, but not limited to: (a) locate sensitive receptors as far as possible from any freeways, major roadways or other sources of pollution (e.g., loading docks, parking lots); (b) incorporate tiered plantings of trees (redwood, deodar cedar, live oak, Less than significant impact with mitigation incorporated.