04 - Laserfiche WebLink

Ordinance No.2220 Page 9 of 26 type and location of all exterior light fixtures shall be reviewed and approved by the Director of Community Development prior to building permit issuance. 22. BUILDING SURVEY: The applicant shall submit a building survey and/or record of survey and a site development plan in accordance with the provisions of Chapter 18.68 of the PMC. These plans shall be approved by the Chief Building Official prior to building permit issuance for buildings or site improvements in each phase. The site development plan shall include all required information to design and construct site, grading, paving, drainage, and utilities. 23. PAD AND SETBACK CERTIFICATION: The applicant shall submit a pad elevation certification prepared by a California licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community Development certifying the pad elevations and building locations (setbacks) are conforming to the approved plans, prior to receiving a foundation inspection for structures in each phase. 24. BUILDING HEIGHT CERTIFICATION: The applicant shall submit a building height certification prepared by a California licensed land surveyor or civil engineer to the Director of Community Development before the first framing or structural inspection by the Building and Safety Division, for structures in each phase. The height of the structures shall be surveyed and verified as being in conformance to the approved building heights as shown on Exhibit B or as otherwise conditioned. 25. FINAL INSPECTION: Final inspection by the Planning Division is required prior to occupancy of any building. 26. TRANSFORMERS: New electrical transformers shall beplaced underground, or g aboveground and screened from view to the satisfaction of the Director of Community Development. Details of the new electrical transformers, and any screening architecturally compatible with the building, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Engineering/City Engineer and Director of Community Development prior to building permit issuance. 27. MECHANICAL EQUIPMENT— SCREENING: The applicant shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on theround or on the roof, with materials architecturally gto ally compatible with the building. Screening details shall be shown on the plans submitted for building permit, the.adequacy of which shall be determined by the Director of Community Development. All required screening shall be installed prior to final occupancy. 28. TRASH ENCLOSURE: All trash,, refuse, and recycling shall be contained completely within enclosures constructed with roofs. Containers shall be stored within the enclosures at all times except when being unloaded. The enclosures shall be sized to accommodate trash, recycling, and green waste containers in compliance with the Alameda County Mandatory Recycling Ordinance. The materials and colors of any new enclosures shall match or be compatible with the primary building on site and the gates shall be metal or solid wood unless otherwise approved by the Director of Community Development. Elevation drawings and plan details, including color and material of the enclosures noted, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Community Developmentprior to building permit issuance.