04 - Laserfiche WebLink

Ordinance No.2217 Page 10 18 19 20. 21 22. BUILDING HEIGHT CERTIFICATION: The applicant shall submit a building height certification prepared by a California licensed land surveyor or civil engineer to the Director of Community Development before the first framing or structural inspection by the Building and Safety Division, for structures in each phase. The height of the structures shall be surveyed and verified as being in conformance to the approved building heights as shown on Exhibit B or as othenryise conditioned. FINAL INSPECTION: Final inspection by the Planning Division is required priorto occupancy of any building. TRANSFORMERS: New electrical transformers shall be placed underground, or aboveground and screened from view to the satisfaction of the Director of Community Development. Details of the new electrical transformers, and any screening architecturally compatible with the building, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Engineering/City Engineer and Director of Community Development prior to building permit issuance. MECHANICAL EQUIPMENT - SCREENING: The applicant shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the building. Screening details shall be shown on the plans submitted for building permit, the adequacy of which shall be determined by the Director of Community Development. All required screening shall be installed prior to final occupancy. TRASH ENCLOSURE: Alltrash, refuse, and recycling shall be contained completely within enclosures constructed with roofs. Containers shall be stored within the enclosures at all times except when being unloaded. The enclosures shall be sized to accommodate trash, recycling, and green waste containers in compliance with the Alameda County Mandatory Recycling Ordinance. The materials and colors of any new enclosures shall match or be compatible with the primary building on site and the gates shall be metal or solid wood unless otherwise approved by the Director of Gommunity Development. Elevation drawings and plan details, including color and material of the enclosures noted, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Community Development prior to building permit issuance. RECYCLING AND COMPOSTING PROGRAMS: The project shall comply with the current City/Pleasanton Garbage Service recycling and composting programs. Green Building and Sustainabilitv Measures GREEN BUILDING - NON-RESIDENTIAL NEW CONSTRUCTION: Prior to building permit issuance, a list of the green building measures used in the design, covered by this approval, shall be provided to the Planning Division for review and approval by the Director of Community Development. The project shall be designed, constructed and operated to a level of design efficiency equal to a Gold level for all Project buildings, except the parking structure, using U.S. Green Building Council's "Leadership in Energy and Environmental Design (LEED)'rating system. The green building measures shall be shown on the building permit plans submitted to the Building and Safety Division. Each proposed point identified shall have a notation indicating the sheet(s) the point can be found. A special inspection by the Planning Division shall be coordinated with regards to 23. 24