3_Exhibits A1-A3 - Laserfiche WebLink

Resolution No. PC-2021-07 Page Eleven 21. MECHANICAL EQUIPMENT — SCREENING: The applicant shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the building. Screening details shall be shown on the plans submitted for building permit, the adequacy of which shall be determined by the Director of Community Development. All required screening shall be installed prior to final occupancy. 22. TRASH ENCLOSURE: All trash, refuse, and recycling shall be contained completely within enclosures constructed with roofs. Containers shall be stored within the enclosures at all times except when being unloaded. The enclosures shall be sized to accommodate trash, recycling, and green waste containers in compliance with the Alameda County Mandatory Recycling Ordinance. The materials and colors of any new enclosures shall match or be compatible with the primary building on site and the gates shall be metal or solid wood unless otherwise approved by the Director of Community Development. Elevation drawings and plan details, including color and material of the enclosures noted, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Community Development prior to building permit issuance. 23. RECYCLING AND COMPOSTING PROGRAMS: The project shall comply with the current City/Pleasanton Garbage Service recycling and composting programs. Green Building and Sustainability Measures 24. GREEN BUILDING — NON-RESIDENTIAL NEW CONSTRUCTION: Prior to building permit issuance, a list of the green building measures used in the design, covered by this approval, shall be provided to the Planning Division for review and approval by the Director of Community Development. The project shall be designed, constructed and operated to a level of design efficiency equal to a Gold level for all Project buildings, except the parking structure, using U.S. Green Building Council's "Leadership in Energy and Environmental Design (LEED)" rating system. The green building measures shall be shown on the building permit plans submitted to the Building and Safety Division. Each proposed point identified shall have a notation indicating the sheet(s) the point can be found. A special inspection by the Planning Division shall be coordinated with regards to exterior materials. Prior to building permit final, all of the green building measures indicated on the approved checklist shall be inspected and approved by either the City of Pleasanton, a third party rater, or the applicant shall provide written verification by the project engineer, architect, landscape architect, or designer. (Project Specific Condition) program submitted to the Planning Division under a separate application. 13. FENCE/WALL: All fencing and walls shall be shown on the construction plans with the building permit submittal. The design and location must be approved by the Planning Division and comply with all setback requirements. mitigate the loss of the existing landscaping and trees. Therefore, it is recommended the City Council make this finding. uses to support Pleasanton's increasing business activity. It is recommended the City Council find the proposed development plan is consistent with the City's General Plan, and this finding can be made. November 18, 2020 Approvals or that could prevent or 4412928_2 -10- the Project, which list shall include the following items: 4412928_2 -8-