3_Exhibits A1-A3 - Laserfiche WebLink

Resolution No. PC-2021-07 Page Nine 7. PHASING — DESIGN/DESIGN REVIEW PROCESS: All structures/site improvements associated with future development phases on the subject site, specifically buildings 2 and/or 3 and the parking structure, but also including any ancillary structures and/or site improvements, shall be designed to be architecturally/thematically compatible/consistent with the Phase I structures and/or site improvements shown in the "Approved Plans" to the satisfaction of the Director of Community Development. A separate Design Review application shall be required for each subsequent phase and shall be subject to Planning Commission consideration. (Project Specific Condition) 8. PHASING — STRUCTURE PLACEMENT: All structures/site improvements associated with future development phases on the subject site, specifically buildings 2 and/or 3 and the parking structure, but also including any ancillary structures, shall be set back a minimum of 32 feet from all property lines as shown on the "Approved Plans" However, as part of the subsequent design review process, the Planning Commission may require larger setbacks to be provided for some or all portions of buildings 2 and 3, to the extent necessary to maintain visual compatibility with the surrounding area, avoid over- concentrating building height and mass close to project frontages, and to provide for an attractive and varied building massing, articulation and streetscape, in a manner consistent with that achieved for Building 1 . Minor changes to the structure placement determined appropriate by the Planning Commission during subsequent design review may be allowed, subject to the approval of the Director of Community Development if found to be in substantial conformance with the "Approved Plans." (Project Specific Condition) Site Development and Building Design 9. BUILDING MATERIALS AND COLORS: The building materials and colors in the Approved Plans shall be stated on the building permit plans. 10. PAVING MATERIALS: The color, material, design, and product specifications for the paving materials used on-site shall be in conformance with the Approved Plans and included with the building permit submittal. Any proposed modifications to the final paving design details shall be subject to review and approval by the Planning Division prior to issuance of building permits. 11 . WINDOWS: Manufacturer type, design, material, and installation details for all windows within the project shall be specified for each unit/building in conformance with the Approved Plans in the building permit submittal. Any proposed modifications shall be subject to review and approval by the Planning Division prior to issuance of building permits. 12. SIGN PROGRAM: Site and building signage shall be reviewed under a comprehensive sign program submitted to the Planning Division under a separate application. 13. FENCE/WALL: All fencing and walls shall be shown on the construction plans with the building permit submittal. The design and location must be approved by the Planning Division and comply with all setback requirements. mitigate the loss of the existing landscaping and trees. Therefore, it is recommended the City Council make this finding. uses to support Pleasanton's increasing business activity. It is recommended the City Council find the proposed development plan is consistent with the City's General Plan, and this finding can be made. November 18, 2020 Approvals or that could prevent or 4412928_2 -10- the Project, which list shall include the following items: 4412928_2 -8-