ORD 2200 - Laserfiche WebLink

Ordinance No. 2200 Page 11 of 26 16. BUILDING MATERIALS AND COLORS: The building materials and colors in the Approved Plans shall be stated on the building permit plans. 17. ROOF MATERIAL: The roof for the proposed buildings and fuel station canopy shall be flat concrete tile. Prior to issuance of a building permit, a sample of the proposed roof material shall be submitted to the Planning Division, and it is subject to review and approval by the Director of Community Development. (Project Specific Condition) 18. SIGN PROGRAM: Site and building signage shall be reviewed under a comprehensive sign program submitted to the Planning Division under a separate application. 19. OUTDOOR STORAGE: There is to be no outdoor storage without prior approval by the City. 20. LIGHTING PLAN: The applicant shall submit a revised lighting plan with the building permit submittal. The luminosity of on-site lighting shall be reduced to minimize light spill beyond the project site onto to adjoining properties and/or streets. The plan shall include photometric contours, manufacturer's specifications on the fixtures, and mounting heights. All exterior lighting including landscape lighting shall be directed downward and designed or shielded so as to not shine onto neighboring properties or streets. The photometrics shall be reviewed and approved by the City Traffic Engineer and Director of Community Development prior to building permit issuance. The type and location of all exterior light fixtures shall be reviewed and approved by the Director of Community Development prior to building permit issuance. (Project Specific Condition) 21. BUILDING SURVEY: The applicant shall submit a building survey and/or record of survey and a site development plan in accordance with the provisions of Chapter 18.68 of the PMC. These plans shall be approved by the Chief Building Official prior to building permit issuance. The site development plan shall include all required information to design and construct site, grading, paving, drainage, and utilities. 22. PAD AND SETBACK CERTIFICATION: The applicant shall submit a pad elevation certification prepared by a California licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community Development certifying the pad elevations and building locations (setbacks) are conforming to the approved plans, prior to receiving a foundation inspection for the structures. 23. BUILDING HEIGHT CERTIFICATION: The applicant shall submit a building height certification prepared by a California licensed land surveyor or civil engineer to the Director of Community Development before the first framing or structural inspection by the Building and Safety Division. The height of the structures shall be surveyed and verified as being in conformance to the approved building heights as shown on Exhibit B or as otherwise conditioned. 24. FINAL INSPECTION: Final inspection by the Planning Division is required prior to occupancy. 25. TRANSFORMERS: New electrical transformers shall be placed underground, or aboveground and screened from view to the satisfaction of the Director of Community Development. Details of the new electrical transformers, and any screening architecturally compatible with the building, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Engineering/City Engineer and Director of Community Development prior to building permit issuance.