Laserfiche WebLink
Ordinance No. 2197 <br /> Exhibit B <br /> Page 36 <br /> 20.65.120 Section 303 amended - Swimming Pools, Spas and Hot Tubs. <br /> Section 303 of the International Property Maintenance Code, 2018 Edition is amended to read as <br /> follows: <br /> 303.1 Swimming pools. Swimming pools shall be maintained in a clean and sanitary condition, <br /> and in good repair. <br /> 303.2 Enclosures. Private swimming pools, hot tubs and spas containing water more than 18 <br /> inches (457 mm) in depth shall be completely surrounded by a fence or barrier in compliance with <br /> Section 3109 in the 2019 California Building Code as applicable. Gates and doors in such barriers <br /> shall be self-closing and self-latching. Where the self-latching device is less than 60 inches (1524 <br /> mm) above finished grade or landing, the release mechanism shall be located on the pool side of <br /> the gate. Self-closing and self-latching gates shall be maintained such that the gate will positively <br /> close and latch when released from an open position of 6 inches (152 mm) from the gatepost. No <br /> existing pool enclosure shall be removed, replaced or changed in a manner that reduces its <br /> effectiveness as a safety barrier. <br /> Exception: Spas or hot tubs with a safety cover that complies with ASTM F 1346-91 shall <br /> be exempt from the provisions of this section. <br /> 20.65.150 Section 404.6 amended - Efficiency Unit. <br /> Section 404.6 of the International Property Maintenance Code, 2012 2018 Edition is amended to <br /> read as follows: as shown in section 1207.4 of the 2019 California Building Code. <br />