Laserfiche WebLink
2. A topographical map showing existing contours and proposed lot lines, <br />which may be integrated with the site plan described in subsection (D)(1) <br />of this section; the lot lines may be omitted if building locations on the site <br />plan make proposed lot lines obvious. The topographical map shall be at a <br />scale no smaller than one inch equals 100 feet showing contour lines <br />existing prior to grading at an interval of not more than 10 feet. The <br />director of community development, or his or her designated <br />representative, may allow a reduction in the scale of the map or allow an <br />increase in the contour interval when in his or her opinion the size of the <br />parcel or its terrain requires such changes to make the map more <br />meaningful. The director may omit the requirement for a topographical <br />map entirely for a parcel located on land having an average slope of less <br />than 10 percent. <br />3. A grading plan showing increments of the depths of all cuts and fills in <br />various colors or any similar display which shows the cuts, fills and depths <br />thereof and readily distinguishes between differing fills and depths; and a <br />slope classification map showing, in contrasting colors, all land which has <br />less than 10 percent slope, that land which has a slope between 10 <br />percent and 20 percent and all land which has a slope greater than 20 <br />percent. The director of community development, or his or her designated <br />representative, may waive the slope classification map for properties <br />which do not have significant land areas in excess of 10 percent slope; <br />4. The director of community development, or his or her designated <br />representative, shall require, where appropriate, development profiles <br />which show the relationship of the proposed project to any dominant <br />geological or topographical features which may be on or in the vicinity of <br />the proposed project; <br />5. On the site plan or on a separate plat show any tree(s), including size and <br />species as provided in Chapter 17.16 of this code and whether or not such <br />tree(s) is to be removed or destroyed; <br />6. Sufficient dimensions to show right-of-way widths, pavement widths, street <br />grades, whether streets are to be public or private, and all proposed <br />frontage improvements on new and existing streets; <br />7. A geologic report shall be prepared by a registered civil engineer and/or a <br />registered geologist as required by Chapter 17.12 of this code. The <br />director of community development may require a current preliminary soils <br />report prepared by a registered civil engineer and/or a registered geologist <br />when development is proposed in areas in excess of 10 percent average <br />slope, there is known or suspected ground instability, high water table, or <br />significant erosion.; <br />8. A detailed landscaping plan showing the natural open space, if any, which <br />will remain upon completion of development, all existing trees and the <br />precise boundaries of additional landscaping; the landscape plan shall <br />include container size of all trees and shrubs, species of all plant material, <br />evidence of an irrigation system (indicating whether manual or automatic), <br />street furniture, and fencing materials, and where applicable, dimensions <br />and locations. If trees are located on the site, a tree report prepared by a <br />7 <br />