Laserfiche WebLink
Grading, Excavation, and Drainage <br /> • The design objectives for parcel grading are to create smooth slope transitions <br /> between adjacent parcels and proposed improvements, eliminate abrupt or <br /> unnatural landforms, and promote positive surface drainage. Proposed grading <br /> schemes will be examined during the individual design review process on a project <br /> by project basis. <br /> • Off-site grading shall not be permitted. Each site must meet existing grade <br /> conditions at property and/or lease lines. <br /> • Concentrated drainage across walkways and other pedestrian areas is not <br /> permitted. Drainage across driveway entries is to be avoided. <br /> • Where feasible, integrate storm water treatment features into on-site open space. <br /> Utility, Solar. Electrical, and Mechanical Equipment <br /> • All ground, building, or roof-mounted electric, gas, mechanical units, and similar <br /> devices must be properly located to avoid unsightliness or potential safety problems, <br /> and must be properly screened. Such equipment should be located and screened in <br /> a manner compatible with the design of the building and site improvements. <br /> • No heating, air conditioning, electrical, or other equipment may be installed on the <br /> roof of any building or structure unless screened with materials compatible with the <br /> predominant exterior building material. All ground equipment should be located a <br /> minimum of 25 feet from all public streets, 5 feet from any sidewalk, and shall be <br /> screened accordingly. <br /> • No transformer, electric, gas, meter of any type or other apparatus shall be located <br /> on any power pole or hung on the outside of any building, except where specially <br /> approved by the City. The screening of all exterior mounted equipment should be <br /> compatible with the exterior building materials. <br /> • Utility layouts and connection points are part of the design review process. All <br /> permanent utility lines shall be installed underground. No overhead wiring is <br /> permitted. <br /> • Passive heating and cooling design features (e.g., shading devices to reduce sun <br /> exposure) and building design that can accommodate solar collectors and other <br /> alternative energy systems are required. <br />