PC-99-65 - Laserfiche WebLink

sweepmg. d. Install filter materials (such as sandbags, filter fabric, etc.) at the storm drain inlet nearest the downstream side of the project site in order to retain any de- bris or dirt flowing into the City storm drain system. Filter materials shall be maintained and/or replaced as necessary to ensure effectiveness and to pre- vent street flooding. Dispose of filter particles in the trash. e. Create a contained and covered area on the site for the storage of bags, ce- ment, paints, flammable, oils, fertilizers, pesticides, or any other materials used on the project site that have the potential for being discharged to the storm drain system through being windblown or in the event of a material spill. f. Never clean machinery, tools, brushes, etc., or rinse containers into a street, gutter, or storm drain. g. Ensure that concrete/gunite supply trucks or concrete/plasterers operations do not discharge wash water into street gutters or drains. h. Construction access routes shall be limited to those approved by the City En- gineer or Building Inspector and shall be shown on the approved grading plan. 123. In conjunction with the tentative map, the specific details for the driveway to the existing home shall be included for review and approval. 124. The existing home shaH connect to the sewer system. Said connection shaH occur prior to occupancy of any of the new homes. Specific details shall be shown on the final map improvement plans subject to review and approval of the City Engineer. 125. Access shaH be maintained for the existing easement holderslhomes at all times during the construction process. In the event that access is interrupted, all construction activity shall immediately stop until such time as access is restored to the satisfaction of the City Engineer. 126. Lots above elevation 400 shall have individual hydromatic booster pumps for their water systems. Where feasible the pumps shall be located in the garage of the unit. Page 21