Laserfiche WebLink
Stoneridge Drive Specific Plan Amendment/Staples Ranch Project <br /> Mitigation Monitoring and Reporting Plan <br /> 15. The subject project shall be implemented as required by the EIR and Mitigation <br /> Monitoring and Reporting Plan (MMRP). All mitigation measures of the Stoneridge <br /> Drive Specific Plan Amendment/Staples Ranch EIR are hereby incorporated by <br /> reference and shall be implemented as required by the EIR and MMRP. If any of <br /> the conditions of approval conflict with any applicable EIR mitigation measures, <br /> the requirements of EIR mitigation measures apply. <br /> 16. Prior to the issuance of a building permit, the project developer shall pay all traffic <br /> fees to which the property may be subject, as set forth in the MMRP. <br /> 17. The project developer shall provide adequate light levels for security and retail <br /> needs, while minimizing light spillover onto adjacent properties. Parking area light <br /> standards shall be limited to 25 feet in height. In accordance with measure VQ-3.1 <br /> and VQ-3.3 of the MMRP, all exterior lighting shall be directed downward and all <br /> perimeter lighting shall be shielded or utilize equivalent technology to avoid shining <br /> on neighboring properties. Energy efficient lamp technologies shall be <br /> incorporated wherever feasible (mercury vapor shall be avoided, and incandescent <br /> lights shall be avoided unless they are integrated with a control mechanism that <br /> limits their operation time). The use of such lighting shall help minimize impacts <br /> on reduced visibility of the night sky. Plans submitted to the Building and Safety <br /> Division for permits shall demonstrate compliance with this measure to the <br /> satisfaction of the Director of Community Development. <br /> 18. In accordance with measure VQ-3.2, the project developer shall design lighting <br /> systems to provide appropriate light illumination for the proposed project and <br /> protect surrounding uses from spillover light and glare by incorporating the <br /> following guidelines and specifications The lighting plan submitted to the Building <br /> and Safety Division with plan check plans shall demonstrate compliance with these <br /> measures. <br /> a. Prior to the issuance of a building permit, a lighting plan that includes <br /> specifications for signs and exterior lighting shall be submitted for review and <br /> approval by the Director of Community Development. The plan shall include a <br /> photometric diagram, prepared by a certified lighting professional, showing <br /> predicted maintained lighting levels produced by the proposed lighting fixture <br /> facilities that achieve the following during hours of operation: <br /> i. The first row of light standards shall not exceed a foot candle level of 35.0 <br /> by the southern boundary of the Auto Mall site as measured at ground level. <br /> ii The foot candle level for the remainder of the project site shall not exceed <br /> 10.0 foot candles as measured at ground level, except <br /> ® In approved designated display areas where merchandise is <br /> presented to customers, the foot candle level may be up to, but not <br /> exceed, 30.0 at ground level; and <br />