11 - Laserfiche WebLink

r such plans or other data to demonstrate that state law does not require that the plans be prepared by a licensed architect or engineer. The Building and Safety Official may require plans, computations and specifications to be prepared and designed by an engineer or architect licensed by the state to practice as such even if not required by state law. EXCEPTION: The Building and Safety Official may waive the submission of plans, calculations, construction inspection requirements and other data if it is found that the nature of the work applied for is such that reviewing of plans is not necessary to obtain compliance with this code. 20.04.190 Deferred submittals. For the purposes of this section, deferred submittals are defined as those portions of the design which are not submitted at the time of the application and which are to be submitted to the Building and Safety Official within a specified period. Deferral of any submittal items shall have prior approval of the Building and Safety Official. The registered design professional in responsible charge shall list the deferred submittals on the plans and shall submit the deferred submittal documents for review by the Building and Safety Official. Submittal documents for deferred submittal items shall be submitted to the registered design professional in responsible charge who shall review them and forward them to the Building and Safety Official with a notation indicating that the deferred submittal documents have been reviewed and that they have been found to be in general conformance with the design of the building. The deferred submittal items shall not be installed until their design and submittal documents have been approved by the Building and Safety Official. 20.04.200 Information on Plans and Specifications. Plans and specifications shall be drawn to scale on substantial paper and shall be of sufficient clarity to indicate the location, nature and extent of the work proposed and show in detail that it will conform to the provisions of this code and all relevant laws, ordinances, rules and regulations. Where conventional construction provisions are identified in Group R 3 occupancies, all braced wall lines shall be identified on the construction documents and all pertinent information including, but not limited to, bracing methods, location and length of braced wall panels, foundation requirements of braced wall panels at top and bottom shall be provided. Plans for buildings of other than Group R 3 and Group U Occupancies shall indicate how required structural and fire resistive integrity will be maintained where penetrations will be made for electrical, mechanical, plumbing and communication conduits, pipes and similar systems. 20.04.210 Time Limitation of Application. An application for a permit for any proposed work that did not require a plan review shall be deemed to have been abandoned 180 days after the date of filing, unless such application has been pursued in good faith or a permit has been issued; except that the Building and Safety Official is authorized to grant one or more extensions of time for an additional period not exceeding 180 days. The extension shall be requested in writing and justifiable cause demonstrated. An application shall not be extended if this code or any other pertinent laws or ordinances have been amended subsequent to the date of application.