Laserfiche WebLink
ti <br /> PUD-112/1027 Rose Avenue <br /> Design Guidelines Page 3 <br /> Walls: Material should be horizontal siding. <br /> Windows: Existing horizontal sliding windows can be retained if that area is not <br /> affected by any addition/alteration. However, it is highly recommended existing <br /> windows be replaced for consistency. New windows should be vertical in <br /> proportion, i.e. single or double hung. A series of windows can be placed together <br /> for wider spans. All new windows should be recessed a minimum of 2 inches and <br /> trimmed with wood. <br /> Accent: Shutters, vents, corbels, knee braces, and wood posts are encouraged. <br /> Additional Materials: Brick can be added to new areas to tie into the existing <br /> material used at the front. Limestone, coolstone and similar materials are <br /> prohibited of the facade. <br /> Colors: Although the current body color is white, only warm earthtones will be <br /> allowed if any addition/alteration occurs. These can include beiges, sand, browns, <br /> and grays. Stark White on walls is prohibited. If an addition/ateration occurs, new <br /> white applications can be used only as a trim color. <br /> Green Building/Cal Green: Homes must comply with current standards for both <br /> Green Building and Cal Green. A minimum 50 points is required for the Build-it- <br /> Green Checklist. <br /> Landscaping: Landscaping must comply with Bay Area Basics and meet the State <br /> of California low water regulations. One (1) 24" box street tree is required for Lot 3 if <br /> an addition or significant alteration occurs. <br />