Laserfiche WebLink
Anchor Plate Free opening <br /> 0 20Srnm <br /> IRS 3 12"(89mm) Pole Shaft Section <br /> Base&Bolts Information 01110111 Projection <br /> -Bolt Circle: < < <br /> 12 1/2" (318mm) <br /> I <br /> Cones with 4 steel anchor - Material: — <br /> bolts, 1" X 33" + 3" J Type Cast Aluminum - ,85n,11,1 - <br /> Bolt-, Fully Galvanized, 8 <br /> nuts d 8 washers. - NOTE: <br /> Bolt Circle Allowed: <br /> 11 1/2" to 13" <br /> 292mm to 330mm <br /> Qty 22 Pole RAS61V-14-BKTX <br /> Description of Components: N <br /> Pole Shaft: Shall be made from a 5 9/16" (141 mm) round extruded 6061-T6 aluminum <br /> tubing, having a 0.250"(6.4mm)wall thickness, welded to the pole base. <br /> Joint Cover: Two-piece round joint cover made from cast 356 aluminum, mechanically <br /> fastened with stainless steel screws. <br /> Pole Base: Shall be made from an 8 5/8" (219mm) round extruded 6061-T6 aluminum <br /> tubing base having a 0.148" (4.8mm)wall thickness, welded to both the bottom and top —_ <br /> of the anchor plate. <br /> Maintenance Opening: The pole shall have a 4 1/2" x 10" (114mm x 254mm) <br /> maintenance opening centered 25 1/4" (641mm) from the bottom of the anchor plate, = £ <br /> complete with a weatherproof embossed aluminum cover and a copper ground lug. ". <br /> a <br /> Base Cover: Two piece round base cover made from cast 356 aluminum, mechanically E <br /> fastened with stainless steel screws. <br /> Note: A tenon will be provided when the luminaire or bracket does not fit directly on pole 1 , <br /> shaft.Tenon not shown on the drawing. I 8. <br /> 457mm <br /> IMPORTANT: Philips Lumec strongly recommends the installation of the complete <br /> lighting assembly with all of its accessories upon the anchoring of the pole. This will <br /> ensure that the structural integrity of the product is maintained throughout its lifetime. <br /> Pole Weight: 65 lbs (29.5 kg) <br />