RES 16819 - Laserfiche WebLink

TABLE 1. MITIGATION MONITORING AND REPORTING PROGRAM Mitigation Measures implementation Monitoring Monitoring and Monitoring Verification of Procedures Responsibility Reporting Action Schedule Compliance Registered Environmental Assessor or a registered Assessor or a Division inspection during construction. engineer to confirm the absence or presence of registered engineer demolition to verify Date: asbestos-containing materials and lead-based paint in to conduct appropriate structures to be demolished.This survey shall be appropriate handling of completed prior to any demolition activities associated survey(s)that hazardous with the project. Adequate abatement practices,such as confirm the materials. containment and/or removal for all asbestos-containing absence or materials and lead-based paint,shall be implemented in presence of accordance with applicable laws prior to demolition. Any asbestos-containing PCB-containing equipment,fluorescent light tubes containing materials,lead- mercury vapors,and fluorescent light ballasts containing based paint, PCBs, DEHP shall also be removed and legally disposed of. and DEHP. Mitigation Measure 4.12-4a: During periods of high fire The project Community Review the Fire Prior to issuance Verified by: danger or during red flag conditions,operation of applicant shall Development Prevention Plan for of grading or equipment with small motors for vegetation/landscape implement the Department; the project;conduct building permit, maintenance shall be prohibited. All mechanical measures as Planning Division field inspection whichever is equipment shall have approved spark arrestors and specified and shall during construction. sooner; inspect comply with California Public Resources Code(PRC) prepare a Fire during Date: Sections 4431,4435,4442 and 4437 to limit potential Prevention Plan construction. for ignition of incidental fires. Mitigation Measure 4.12-4b: Comply with the WUIP,which requires that vegetation be managed, that hydrants be operational,and that an approved Fire Prevention Plan be completed prior to construction.The Fire Prevention Plan requires on- site fire suppression resources to include shovel, water pump,fire extinguisher,and two-way radio or communications for fire reporting. Mitigation Measure 4.12-5a: During periods of high The project Community Verify completion of Prior to issuance Verified by: fire danger or during red flag conditions,operation of applicant shall Development Fire Safety of grading or equipment with small motors for vegetatioMandscape implement the Department; Awareness building permit, maintenance shall be prohibited. All mechanical measures as Planning Division Program and WUIP whichever is equipment shall have approved spark arrestors and specified,including and compliance sooner; inspect comply with California Public Resources Code(PRC) the preparation of a with the provisions during Date: Sections 4431,4435,4442 and 4437 to limit potential Fire Safety of these plans; construction for ignition of incidental fires. Awareness conduct field Program. inspection during Mitigation Measure 4.12-5b:The project sponsor shall construction and prepare a Fire Safety Awareness Program to address regular inspections fire safe behaviors and fuel management.The project after project would include the disclosure of the Program's completion. requirements as part of the CC&Rs for the project development.Alternatively, in consultation with the City, the proposed project could include the formation of an LurD RANCH II-PUD-25 19 JANUARY 2016