RES 15811 - Laserfiche WebLink

TABLE 1. MITIGATION MONITORING AND REPORTING PROGRAM .Implementation • Monitoring Monitoring and Monitoring Verification of Mitigation'Measures .Procedures Responsibility Reporting Action Schedule Compliance • Mitigation Measure 4.12-2: Contingency Plan.The The project sponsor Community Verify that the Prior to issuance Verified by: project sponsor shall require the construction shall prepare a Development Contingency Plan of grading or contractor(s)to observe for previously unidentified Contingency Plan Department; is adequate. building permit, hazardous materials and have a contingency plan for that establishes Engineering whichever is sampling and analysis of potential hazardous materials protocols for the Division sooner. in soil. If any hazardous materials are identified,the identification of Date: contractor(s)shall be required to prepare a Health and previously Safety Plan,conduct sampling to assess the chemicals unidentified present, and identify appropriate disposal methods. hazardous Evidence of potential contamination includes soil materials. discoloration, suspicious odors, the presence of USTs, or the presence of buried building materials. The project sponsor shall also be required to notify the regulatory agencies if the concentration of any chemical exceeds its respective screening level.The assigned lead agency shall oversee all aspects of the site investigation and remedial action and determine the adequacy of the site investigation and remediation activities at the site. Mitigation Measure 4.12-3: Prior to demolition of the Project applicant Community Verify the Prior to issuance Verified by: on-site buildings,the project sponsor shall ensure that a shall hire a Development completion of of demolition Hazardous Building Materials Survey is completed by a Registered Department; required surveys; permit; inspect Registered Environmental Assessor or a registered Environmental Engineering conduct field during engineer to confirm the absence or presence of Assessor or a Division inspection during construction. asbestos-containing materials and lead-based paint in registered engineer demolition to verify Date: structures to be demolished.This survey shall be to conduct appropriate completed prior to any demolition activities associated appropriate handling of with the project. Adequate abatement practices, such as survey(s)that hazardous containment and/or removal for all asbestos-containing confirm the materials. materials and lead-based paint, shall be implemented in absence or accordance with applicable laws prior to demolition. Any presence of PCB-containing equipment,fluorescent light tubes asbestos- containing mercury vapors,and fluorescent light ballasts containing containing DEHP shall also be removed and legally materials, lead- disposed of. based paint, PCBs, and DEHP. 17 LUND RANCH I I—PUD-25 JUNE 2015