10 - Laserfiche WebLink

project/building developer shall submit a final lighting plan including photometrics and drawings and /or manufacturer's specification sheets showing the size and types of light fixtures. The lighting plan shall be subject to the review and approval by the Director of Community Development prior to issuance of building permits for the project. 23. The project shall comply with the current City/Pleasanton Garbage Service recycling and composting programs. 24. The placement of trash and recycle bins inside the garage shall not interfere with the required 20' by 20' interior garage dimensions. 25. The final location of pad- mounted transformers shall be subject to approval by the Director of Community Development prior to issuance of permits by the Building and Safety Division. Such transformers shall be screened by landscaping to the satisfaction of the Director of Community Development. All transformers shall be shown on the plans submitted for issuance of building permits. 26. The applicant and /or developer shall submit a pad elevation certification prepared by a licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community Development certifying that the pad elevations and building locations (setbacks) are pursuant to the approved plans, prior to receiving a foundation inspection for the structures. 27. All excess soil from the site shall be off - hauled from the site and disposed of in a lawful manner. Unless otherwise approved by the Director of Community Development, no stockpiling of dirt on this site shall occur. 28. Prior to the issuance of a grading or building permit, whichever is sooner, the project applicant/developer shall submit an air quality construction plan detailing the proposed air quality construction measures related to the project such as construction phasing, construction equipment, and dust control measures, and such plan shall be approved by the Director of Community Development. Air quality construction measures shall include Basic Construction Mitigation Measures (BAAQMD, May 2011) and, where construction- related emissions would exceed the applicable thresholds, additional Construction Mitigation Measures (BAAQMD, May 2011) shall be instituted. The air quality construction plan shall be included on all grading, utility, building, landscaping, and improvement plans during all phases of construction, access roads, parking areas, and staging areas at construction sites. 29. Pre - construction Breeding Bird Surveys: Prior to development of the subject site and each phase of project activities that have the potential to result in impacts on breeding birds, the project applicant/developer shall take the following steps to avoid direct losses of nests, eggs, and nestlings and indirect impacts to avian breeding success: 4 of 28