Laserfiche WebLink
plans shall have the contractor's wet stamp indicating the California contractor <br /> license type, license number and must be signed. No underground pipeline <br /> inspections will be conducted prior to issuance of approved plans. <br /> • All underground fire protection work shall require a California contractor's <br /> license type as follows: C-16, C-34, C-36 or A. <br /> • All field-testing and inspection of piping joints shall be conducted prior to <br /> covering of any pipeline. <br /> 161. Portable fire extinguisher(s) shall be provided and installed in accordance with <br /> the California Fire Code currently in effect and Fire Code Standard #10-1. <br /> Minimum approved size for all portable fire extinguishers shall be 2A 10B:C. <br /> Building <br /> 162. The project developer shall submit a building survey and/or record of survey and <br /> a site development plan in accordance with the provisions of Chapter 18.68 of <br /> the Municipal Code of the City of Pleasanton. These plans shall be approved by <br /> the Chief Building and Safety Official prior to the issuance of a building permit. <br /> The site development plan shall include all required information to design and <br /> construct site, grading, paving, drainage, and utilities. <br /> 163. The project developer shall post address numerals on the building so as to be <br /> plainly visible from all adjoining streets or driveways during both daylight and <br /> night time hours. <br /> 164. The building covered by this approval shall be designed and constructed to meet <br /> Title 24 state energy requirements. <br /> 165. All building and/or structural plans must comply with all codes and ordinances in <br /> effect before the Building and Safety Division will issue permits. <br /> Bicycle Parking <br /> 166. The project shall provide a minimum bicycle parking equivalent to 5% of the total <br /> number of automobile parking spaces. The maximum required bicycle parking <br /> spaces is 20. <br /> Bicycle racks shall: <br /> a) Be visible and accessible <br /> b) Support the frame of the bicycle and not just one wheel <br /> c) Allow the frame and one wheel to be locked to the rack <br /> d) Allow the use of either a cable or U-shaped lock <br /> e) Be securely anchored <br /> f) Be usable by bikes with no kickstand <br /> g) Be usable by a wide variety of sizes and types of bicycles. <br /> Prior to the installation, the applicant/developer shall submit the design and <br /> location of the bicycle racks to the Director of Community Development for <br /> review and approval. <br /> PUD-98, CarMax Auto Superstores Page 30 <br />