ORD 2071 - Laserfiche WebLink

22.The project shall comply with the current City/Pleasanton Garbage Service recycling and composting programs. 23.All trash and refuse shall be contained completely within the approved trash enclosures. Trash containers shall be stored within the trash enclosures at all times, except when being unloaded. The trash enclosures shall be sized to accommodate trash, recycling, and green waste containers. Elevation drawings and plan details, including color and material of the enclosures noted, shall be included in the plans submitted to the Building and Safety Division for plan check and shall be subject to the review and approval of the Director of Community Development prior to building permit issuance. 24.The final location of pad-mounted transformers shall be subject to approval by the Director of Community Development prior to issuance of permits by the Building and Safety Division. Such transformers shall be screened by landscaping to the satisfaction of the Director of Community Development. All transformers shall be shown on the plans submitted for issuance of building permits. 25.Prior to installation of any apartment project identification signs, a comprehensive sign program shall be submitted for review approval by the Director of Community Development. 26.The applicant and/or developer shall submit a pad elevation certification prepared by a licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community Development certifying that the pad elevations and building locations (setbacks) are pursuant to the approved plans, prior to receiving a foundation inspection for the structures. 27.All excess soil from the site shall be off-hauled from the site and disposed of in a lawful manner. No stockpiling of dirt on this site shall occur without specific review arid approval by the Planning Division. 28.Prior to the issuance of a grading or building permit, whichever is sooner, the project applicant/developer shall submit an air quality construction plan detailing the proposed air quality construction measures related to the project such as construction phasing, construction equipment, and dust control measures, and such plan shall be approved by the Director of Community Development. Air quality construction measures shall include Basic Construction Mitigation Measures (BAAQMD, May 2011) and, where construction-related emissions would exceed the applicable thresholds, additional Construction Mitigation Measures (BAAQMD, May 2011) shall be instituted. The air quality construction plan shall be included on all grading, utility, building, landscaping, and improvement plans during all phases of construction, access roads, parking areas, and staging areas at construction sites.