Laserfiche WebLink
PUD procedure, such as the Suncrest Townhomes on Santa Rita Road and Rotary'Commons on <br /> Palomino Drive. The City has been able to approve developments with higher overall densities, <br /> exceptions to the development standards and a_greater number of affordable housing units <br /> through the PUD process than it would have been possible with conventional zoning. <br /> The PUD process requires review at both the Planning Commission and City <br /> Council level. However, it allows great flexibility regarding the standards to be used and these <br /> standards can be tailored to specific sites, thus ensuring, for example, that sites near transit <br /> incorporate elements of Transit Oriented Development, and that a mix of land uses is allowed <br /> where appropriate. In order to ensure that the PUD process does not create uncertainty for <br /> potential developers, Program 9.8 commits the City to preparing and adopting Development <br /> Standards and Design Guidelines to facilitate the development of high quality multifamily housing, <br /> and to create more certainty for residential development on sites zoned PUD. These standards <br /> are intended to be similar to ones already adopted for multifamily development for three sites in <br /> the Hacienda TOD area. <br /> The site development standards adopted for the Hacienda TOD (Sites 22, 23, and 24) and <br /> proposed for the multi-family development sites (sites 25 through 33) are shown in the Site <br /> Development Standards table on page 85. The adoption of the Draft Housing Site Development <br /> Standards is anticipated by September 2012, and these standards will establish requirements for <br /> setbacks, open space, height, parking, and internal street and alley standards. Minimum <br /> densities (ranging from 30 to 40 units per acre) for these sites were established by rezoning <br /> which was adopted in January 2012. Development review of multi-family projects on these sites <br /> by the Planning Commission and City Council will be limited to an evaluation of the project as to <br /> its consistency with the standards and design guidelines. <br /> Building Code <br /> Pleasanton uses the California Building Code (CBC)which sets minimum standards for <br /> residential development and all other structures. The standards may add material and labor <br /> costs, but are felt to be necessary minimums for the safety of those occupying the structures. <br /> Modification of the Code in order to reduce the cost of housing would not be appropriate if it <br /> affects safety or adversely impacts neighboring properties. <br /> The Building Division enforces energy conservation standards enacted by the State and Chapter <br /> 17.50 of the Pleasanton Municipal Code, Green Building, which generally requires new residential <br /> projects and residential additions greater than 2,000 square feet in size to incorporate Leadership <br /> in Energy and Environmental Design (LEEDTA9) or GreenPoint Rated measures. The standards <br /> may increase initial construction costs, but over time will result in energy savings. <br /> Pleasanton's Building Code enforcement practices are complaint-driven, as are those of 70%of <br /> the local governments surveyed by the State Department of Housing and Community <br /> Development. <br /> The Building Division has adopted special construction rules primarily for safety related reasons, <br /> and to further clarify the requirements of the CBC. Examples of this are the Code requirements <br /> City of Pleasanton Housing Element BACKGROUND—February 2012 87 <br />