04 - Laserfiche WebLink

CODE REQUIREMENTS Building (Applicants/Developers are responsible for complying with all applicable Federal, State and City codes and regulations regardless of whether or not the requirements are part of this list. The following items are provided for the purpose of highlighting key requirements.) 62. The building(s) covered by this approval shall be designed and constructed to the Title 24 Building Standards, including Building, Electrical, Mechanical, Plumbing, Energy, Fire, Green Building and both State and Federal accessibility requirements in effect and as amended by the City of Pleasanton at the time of Building Permit submittal. 63. All building and/or structural plans must comply with all codes and ordinances in effect before the Building and Safety Division will issue permits. 64. All Building and Fire permit plans, including demolition, on-site, building shell and tenant improvements shall be submitted to the Building and Safety Division for review and approval. URBAN STORMWATER CONDITIONS OF APPROVAL 65. The project shall comply with the "Municipal Regional Stormwater NPDES Permit #CASCAS612008 dated October 14, 2009 and amendments to this permit" issued the by California Regional Water Quality Control Board, San Francisco Bay Region, a copy of which is available at the Community Development Department, Public Works/Engineering section at City offices, Alameda County Clean Water Program and at State Water Board http://www.waterboards.ca.gov/sanfranciscobay/water issues/programs/stormwater/M unicipal/index.shtml 66. The project shall also comply with the "NPDES General Permit for Storm Water Discharges Associated with Construction and Land Disturbance Activities" by the California Regional Water Quality Control Board, San Francisco Bay Region. http://www.waterboards.ca.qov/water issues.iprograms/stormwater/construction.shtml 67. The Permit design requirements include, but are not limited to, the following: a. Source control, sight design measures, and design and implementation of stormwater treatment measures are required when commercial, industrial or residential development creates and replaces 10,000 square feet or more of impervious surface, including roof area, streets and sidewalk. b. Hydro-modification standards are required when a new development or redevelopment project creates and replaces total impervious area of one acre or more. c. The Permit requires a proactive Diazinon pollutant reduction plan (aka Pesticide Plan) to reduce or substitute pesticide use with less toxic alternatives. d. The Permit requires complying with the Copper Pollutant Reduction Plan and the Mercury Pollutant Reduction Plan. 68. The following requirements shall be incorporated into the project: PUD-89 Page 8