ORD 2021 - Laserfiche WebLink

Attorney for review and approval before City Council approval of the final subdivision map for this development, and shall be recorded over these lots by separate instrument. 12. The recorded deed of sale for Lot 12 shall include a disclosure for the trees and shrubs to be planted in the rear and side yards of this lot regarding the photovoltaic panels on the roof of the detached garage on the adjacent property located at 4151 Stanley Boulevard. The wording for this disclosure shall be written in simple/plain language, shall be submitted to the City Attorney for review and approval before City Council approval of the first final subdivision map for this development, and shall be recorded over these lots by separate instrument. 13. The applicant shall work with staff to move the chimney on the Plan 1L model (Lot 12) on the east side of the building to reduce the shading of the photovoltaic panels at 4151 Stanley Boulevard. Said revision shall be subject to the review and approval by the Director of Community Development prior to issuance of a building permit. 14. The site plan shall be modified as follows: a. The City's planned Stanley Boulevard street improvements shall be shown along the project frontage. b. The street opening radii at Stanley Boulevard shall match that shown on the grading and drainage plan. c. The air conditioning unit for Lot 9 shall be located in the northern side yard area. Said revisions shall be subject to the review and approval by the Director of Community Development prior to issuance of a building permit. 15. All four building elevations of each model and elevation type shall be submitted for the review and approval by the Director of Community Development prior to issuance of a building permit. 16. The placement of the elevation style (i.e., Spanish or Andalusian) for each lot shall be submitted for the review and approval by the Director of Community Development prior to issuance of a building permit. The same elevation style shall not be used on the same model when they are located adjacent to each other (i.e., Lots 5 and 6, Lots 7 and 9, and Lots 10 and 11). 17. Wood-, fiberglass-, or vinyl-framed/sashed windows shall be utilized on the homes. If fiberglass- or vinyl-framed/sashed windows are used, they shall have a similar frame and sash thickness as found on a traditional wood-framed/sashed window unless the required noise mitigation for this project prevents compliance with this requirement. In addition, window mullions shall be raised and located on the exterior of the window unless the required noise mitigation for this project prevents compliance with this requirement. Manufacturer's specification sheets, details, and sections of the windows, and window treatments (sills, trim, etc.) shall be shown on the building permit plans and shall be subject to review and approval by the Director of Community Development prior to issuance of a building permit. 18. Except as otherwise approved by the Director of Community Development, the stucco on the buildings shall have a relatively smooth hand-troweled look finish. The stucco finish shall be noted on the building permit plans. Prior to installation, the applicant shall submit a sample of the stucco wall finish for review and approval by the Director of Community Development. 6