ORD 1849 - Laserfiche WebLink

31.The applicant's contractor(s) shall obtain an encroachment permit from the City Engineer prior to moving any construction equipment onto the site 32. The applicant shall comply with the City's non-point storm drain ordinance. 33. The applicant shall submit a construction Best Management Practice (BMP) program for review and approval by the Planning Director prior to issuance of any building and/or grading permits. These BMP's shall be implemented by the general contractor and all subcontractors and suppliers of materials and equipment. Construction site cleanup and control of construction debris shall also be addressed in this program. Failure to comply with the approved construction BMP may result in the issuance of correction notices, citations, or a project stop work order. 34. The applicant is responsible for implementing the following measures during all construction phases of the subject project: a.) Gather all construction debris on a regular basis and place them in a dumpster or other container which is emptied or removed on a weekly basis. When appropriate, use larps on the ground to collect fallen debris or splatters that could contribute to storm water pollution. b.) Remove all dirt, gravel, rubbish, refuse, and green waste from the street pavement, and storm drains adjoining the project site. During wet weather avoid driving vehicles offpaved areas. c.) Broom sweep the public street pavement adjoining the project site on a daily basis. Caked-on mud or dirt shall be scraped from these areas before sweeping. d.) lnstall filter materials (such as sandbags, filter fabric, etc.) at the storm drain inlet nearest the downstream side of the project site in order to retain any debris or dirt flowing into the City storm drain system. Filter malerials shall be maintained and/or replaced as necessary to ensure effectiveness and to prevent street flooding. Dispose of filter particles in the trash. e.) Create a contained and covered area on the site for the storage of bags, cement, paints, flammable, oils, fertilizers, pesticides, or any other materials used on the project site that have the potential for being discharged to the storm drain system through being windblown or in the event o£a material spill.