ORD 1700 - Laserfiche WebLink

12. The roofeaves on the exterior edge of the buildings shall be extended 12 to 18 inches. The front facing window for bedroom #3 shall have the same sill detail as the other windows. The specific details for these changes shall be shown on the building permit application plans and shall be subject to review and approval prior to building permit issuance. 13. The applicant shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the main structure. Screening details shall be shown on the plans submitted for issuance of building permits, the adequacy of which shall be determined by the Planning Director. All required screening shall be provided prior to occupancy. 14. All mechanical equipment shall be constructed in such a manner that noise emanating from it will not be perceptible beyond the property plane of the subject property in a normal environment for that zoning district. 15. The applicant shall submit a final lighting plan for the building and the site for the review and approval of the Planning Director prior to issuance of building permits. Lighting shall be directed away from adjacent residences. 16. All parking spaces shall be striped and sized pursuant to City standards. 17. All utilities required to serve any existing or proposed development on-site shall be installed underground, unless otherwise determined by the City Engineer. 18. The applicant shall provide a bond to the City guaranteeing the installation of all common open space and recreational improvements, private streets, street trees, and all common infrastructure improvements shown on the approved development plan or otherwise required as part of this development. The applicant shall provide an itemized cost estimate of said improvements, to be submitted with the bond, for the review and approval the Planning Director prior to issuance of building permits. The bond shall be returned to the applicant upon acceptance of said improvements by the Planning Director. 19. The location of any pad mounted transformers shall be subject to approval by the Planning Director prior to issuance of permits by the Building Department. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. The applicant shall attempt to locate transformers at the rear of the site. PUD-96-15 CONDITIONS OF APPROVAL Page 3 of 12